“Cold Pasting Gum Powder” is an adhesive, specially formulated in use of corrugated box manufacturing using superior starch modifying techniques, controlled batch production and quality control procedures.

SPECIFICATION:

Advantages:

• Better penetration to form deeper fiber-tearing bonds
• High productivity due to low viscosity.
• De-lamination never occurs.
• High CS & BS in Box
• Longer self-life after mix.
• No Sun Drying Required
• Uniform flow
• No Foaming in tray
• Superior bonding.

APPLICATION:
It is used in Carton board and Corrugation boxes manufacturing.

Shelf life

Products are supplied with a minimum of 24 months to recommended shelf life (shown on product label) when stored sealed in original packaging under proper storage conditions. To maintain the product in best condition it is advisable to protect it from exposure to pests and extremes of moisture, light and temperature.

Product packaging

50 KG HDPE Bags with inside polythene liner
500/850 KG Jumbo Bags
25 KG HDPE Bags with inside polythene liner
25 KG Paper Bags with inside polythene liner

Other options can be suggested. Product can be stored indoors in ambient conditions but should be kept away from dampen surface and away from sunlight.

Any other mandatory requirements will be complying to the respective regulations of the destination country.

Special remarks

The content of this specification is based on typical information for this product and results obtained from our own due diligence sampling, assessment, and testing protocols, in addition to any testing/sampling that has been undertaken by our supplier.

However, due to the nature of this product, which is not completely homogenous, test results are indicative / referral and may not be entirely representative of the product throughout the lot. In addition, the content of this Specification does not confirm or ensure that the product is safe for all intended uses.

Our quality and technical documentation does not relieve the customer of their responsibilities to check that the goods supplied are suitable and considered safe for their intended use before purchase. The data provided is for information only.

Any other mandatory requirements will be complying to the respective regulations of the destination country.

GENERAL DISCLAIMER

The information provided in this Product Specification Sheet relates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. Analytical criteria are tested either on each batch or monitored or guaranteed, based on the Product Risk Analysis. For each batch, the status of the analysis may be indicated in the Certificate of Analysis. All information and instructions provided in this Product Specification Sheet are based on the current state of our knowledge at the latest revision date indicated. Typical values are made available to the purchaser on an informational basis. No warranty, whether expressed or implied, or guarantee of those values is intended or implied. The ultimate use of this Product in any finished product is the responsibility of the purchaser. This Product may have restrictions with respect to its use and/or usage levels, and such may vary on a country-by-country basis. The purchaser is responsible for its use of the Product and for its finished product, and that any claims made regarding its use of the Product and/or the finished product comply with applicable laws and regulations.