PRODUCT SPECIFICATION SHEET

Dextrins: [ C6 H10 O5)n ] are also known as pyrodextrins. By heat treatment of starch in presence of acid, dextrins are manufactured. Dextrins are graded on the basis of servity of heat and acid treatment. They are widely used due to its excellent adhesive and water solubility properties.

The yellow dextrin powder is manufactured using the latest techniques and quality control measures. The production process starts with the grinding of raw material, followed by homogenization and sieving in order to obtain uniform particle sizes.

As a binder for cores, yellow dextrin powder is widely used in the foundry industry. There are different types of dextrin powder available, including yellow dextrin powder, which is specially used in foundries to increase dry strength. The chemicals are produced by dry roasting in the presence of a catalyst. It is low viscosity, sticky, and hygroscopic in nature.

Yellow dextrin powder is widely used in the adhesive industry as a water-soluble adhesive and as a testifier. Adhesives are prepared with large quantities of yellow dextrin. Yellow dextrin powder is a fine, dry powder that ranges in colour from light yellow to dark yellow and dark brown. Yellow dextrin powder manufacturers in India.

Specifications

Shelf life

Products are supplied with a minimum of 24 months to recommended shelf life (shown on product label) when stored sealed in original packaging under proper storage conditions. To maintain the product in best condition it is advisable to protect it from exposure to pests and extremes of moisture, light and temperature.

Product packaging

50 KG HDPE Bags with inside polythene liner
500/850 KG Jumbo Bags
25 KG HDPE Bags with inside polythene liner
25 KG Paper Bags with inside polythene liner

Other options can be suggested. Product can be stored indoors in ambient conditions but should be kept away from dampen surface and away from sunlight.

Any other mandatory requirements will be complying to the respective regulations of the destination country.

Applications

• The Adhesives Industries uses large amount of yellow dextrin in the preparation of liquid and dry adhesives. Dextrin goes in to the solution instantly and with a lesser quantity of water, because of their greater adhesive strength and fluidity.
• It serves as an excellent binding agent for sand cores in foundry operations. It gives high green bond strength necessary for the mould to remain intact during handling.

Foundries:

Textile Industries:

As dextrin do not easily react with chemicals, they are specifically suitable for application in the textile field. In Textile printing, they are used as thickener. Free of grit and other impurities, which usually accompany lower grade of starch, they ensure that the copper rolls (used in printing) do not suffer from abrasion. In sizing, they are used with starch to increase adhesiveness. In finishing, they give desired feel to the fabrics.

Color Industries:

Dextrin is largely used in dry distemper. five to ten % of dextrin, mixed with chalk and pigment, acts as carrier and impact good adhesion of the color to the wall.

Foundry, Dyes, Inks, Dry Distemper, Abrasive Industry, Spiral Tube, Paper Tube, Core, Envelope Adhesive.

Special remarks

The content of this specification is based on typical information for this product and results obtained from our own due diligence sampling, assessment, and testing protocols, in addition to any testing / sampling that has been undertaken by our supplier.

However, due to the nature of this product, which is not completely homogenous, test results are indicative / referral and may not be entirely representative of the product throughout the lot. In addition, the content of this Specification does not confirm or ensure that the product is safe for all intended uses.

Our quality and technical documentation does not relieve the customer of their responsibilities to check that the goods supplied are suitable and considered safe for their intended use before purchase. The data provided is for information only.

Any other mandatory requirements will be complying to the respective regulations of the destination country.

GENERAL DISCLAIMER

The information provided in this Product Specification Sheet relates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. Analytical criteria are tested either on each batch or monitored or guaranteed, based on the Product Risk Analysis. For each batch, the status of the analysis may be indicated in the Certificate of Analysis. All information and instructions provided in this Product Specification Sheet are based on the current state of our knowledge at the latest revision date indicated. Typical values are made available to the purchaser on an informational basis. No warranty, whether expressed or implied, or guarantee of those values is intended or implied. The ultimate use of this Product in any finished product is the responsibility of the purchaser. This Product may have restrictions with respect to its use and/or usage levels, and such may vary on a country-by-country basis. The purchaser is responsible for its use of the Product and for its finished product, and that any claims made regarding its use of the Product and/or the finished product comply with applicable laws and regulations